DP-series preheating continuous feeding equipment

    DP-series preheating continuous feeding equipment is the most advanced, clean, energy saving and environmental protection metallurgy off gas using equipment in nowadays. This is using the off gas from the electric furnace to preheat the raw materials, and avoided the high failure rate, complicated operation, can not charging materials continuously and etc weakness from Shaft furnace preheating and preheating bucket and etc traditional ways.  This system has been put into production in more than 20 factories in china and several other countries.  And had gain marked affects in electricity saving, energy saving, production increasing, pollution reduction, and brings great economic benefits for customers. 
    	
    DP- series preheating continuous feeding equipment has characteristics of continuous feeding, continuous melting, continuous smelting and etc… which’s advantages are: smelting period is short, low power consumption, low noises, low investment cost and etc… 
    Compare with the traditional EAF, the technical index of continuously preheating and feeding EAF process are:
    
    Production capacity increases more than 10%.
    Smelting cycle is shortened by 10-15 Min.
    Save energy of 100-120kw.h/t for per ton Steel.
    Electrode consumption decreases by 0.5-0.8%, Refractory material consumption reduces by 5%.
    20-30% reduction of CO2 volume which is released from per ton of Steel; Production site dustiness less than 10mg/M3.
    Dioxin and CO emissions meets relative emission standards, smoke and dust is decreased from 17kg/t to 11kg/t.
    Fully utilization of waste heat: On the Conveyor section can preheat the materials up to 300 degree Celsius and higher, and add burner in conveyor section, can raise the materials up to 600 degree Celsius. The rear part of the waste heat can be used to generate electricity or heating by steam which is produced by waste heat boiler, the gas from the boiler basically can go into the bag type dust collector directly.  But the traditional electric furnace system off gas must go through the water cooled pipes, air forced cooler and etc equipments, it will consumable much energy to cool the temperature down and then can put the gas go into dust collector, so waste the energy from the off gas.
    De-duster Fan power reduces 30%.
    Noise is fewer than 90 decibels during the electric furnace smelting cycle.
    With fully considering for customers kinds of actual using status, DP- series preheating continuous feeding equipment brings direct economic benefits to customers by lowest failure rate, highest energy saving index, biggest investment return.
    
    DP furnace continuous feeding equipment and technology promotion 
    Tel: 15090480399; 18937332186 
    E-Mail: taihangquanli@
    website:
             
    
    Main Technical Specifications
    
    Model 	Specification of Preheating Channel	Dimensions of Raw Materials	Processing Rate	Electric furnace Capacity
    	 (width*length)	(width*depth*length)	 (t/h)	 (t)
    DP20	1260*65000	300*300*500	120	15-20
    DP40	1400*46300	400*400*700	150	30-40
    DP60	1840*48800	450*450*1000	200	50-60
    DP70	2060*60000	500*500*1100	250	70
    DP90	2140*60000	500*500*1100	300	80-90
    DP150	2260*65000	500*500*1200	350	100-150
    

    河南太行全利振动机械销售公司专注于废钢预热连续炼钢装备,大型放矿机,大型木片筛等

  • 词条

    词条说明

  • DP-series preheating continuous feeding equipment

    DP-series preheating continuous feeding equipment is the most advanced, clean, energy saving and environmental protection metallurgy off gas using equipment in nowadays. This is using the off gas from

  • 太行全利再创奇迹:DP废钢预热电炉连续加料装备发货突破50台

    2018新年刚过伊始,记者步入位于鹤壁市鹤山区的全国**电炉节能炼钢装备生产企业河南太行全利公司,刚进入车间就见到弧光闪烁,天车穿梭,工人都在紧张有条不紊的工作,到处都是一片繁忙的景象。 ??自从2017初,随着地区对中频炉和小电炉炼钢工艺严格治理力度的不断加大,国内相关企业经过对国内外炼钢制造企业的多方实地考察,大家较终不约而同的对太行全利重工研发符合地区冶炼工艺要求的低成本,环保*节能炼钢D

  • 全利重工:依靠科技获6亿元伊朗钢铁工程总承包订单

      当前在**经济下行和国内政策调控的双重影响下,**钢材市场需求萎缩,宏观经济增速放缓导致下游需求持续不振,预计短期内难有明显改善。国内外需求均严重不足,市场压力进一步加大,钢铁企业竞争加剧、钢铁企业为了生存竞相控制或减少生产成本,国内与钢铁有关联冶金制造机械企业也是云雾飘渺前途未卜!。 然而就在2012年8月3日,河南省鹤壁机械制造业的*企业、全国**的电炉节能炼钢成套科技装备生产

  • 印尼钱王力宝集团**李文正访问太行全利重工

    2012年10月14日,印尼力宝集团董事局**李文正先生一行莅临河南太行全利重工股份有限公司工作访问,随后与集团公司**和国内相关技术*进行了详细座谈和合作项目的技术咨询,并对访问结果表示满意。 印尼力宝集团是在上世纪80年代后期,由“印尼钱王”李文正与印尼首富林绍良携手创立。力宝集团是印尼较大的金融控股财团,旗下控有各国上市企业20多家,投资领域包括商业银行、保险、房地产、百货超市、制造业、

联系方式 联系我时,请告知来自八方资源网!

公司名: 河南太行全利振动机械销售公司

联系人: 李勇

电 话: 0392-15090480399

手 机: 15090480399

微 信: 15090480399

地 址: 河南安阳河南省鹤壁市鹤山区北站一号

邮 编: 458010

网 址: thqlxs.cn.b2b168.com

八方资源网提醒您:
1、本信息由八方资源网用户发布,八方资源网不介入任何交易过程,请自行甄别其真实性及合法性;
2、跟进信息之前,请仔细核验对方资质,所有预付定金或付款至个人账户的行为,均存在诈骗风险,请提高警惕!
    联系方式

公司名: 河南太行全利振动机械销售公司

联系人: 李勇

手 机: 15090480399

电 话: 0392-15090480399

地 址: 河南安阳河南省鹤壁市鹤山区北站一号

邮 编: 458010

网 址: thqlxs.cn.b2b168.com

    相关企业
    商家产品系列
  • 产品推荐
  • 资讯推荐
关于八方 | 八方币 | 招商合作 | 网站地图 | 免费注册 | 一元广告 | 友情链接 | 联系我们 | 八方业务| 汇款方式 | 商务洽谈室 | 投诉举报
粤ICP备10089450号-8 - 经营许可证编号:粤B2-20130562 软件企业认定:深R-2013-2017 软件产品登记:深DGY-2013-3594
著作权登记:2013SR134025
Copyright © 2004 - 2024 b2b168.com All Rights Reserved