ZSJ系列双辊挤浆机

时间：2018-08-18

作者：沁阳市恒丰造纸设备有限公司

ZSJ系列双辊挤浆机/ ZSJ Series Twin-Roll Press

用途：

SG935-Ⅰ型双辊挤浆机主要用于浆料的洗涤和脱水浓缩，适用于深色浆和漂白浆的过滤洗涤和浓缩，去除浆料中溶解的固形物、**物和无机物，它能**浆料给后序工艺浓度均匀。

结构特点:

本机主要由机架、升降大桶、压榨辊、出料碎浆螺旋、喷淋系统及上护罩等组成。压榨辊的转动形式：采用液压马达驱动。

对于游离度较低、纤维较短或浆浓较高的机械木浆、苇浆、竹浆、庶渣浆、草浆等在中低浓度下均可选用双辊挤浆机来洗涤浓缩。

本设备自动化程度高，操作简便，运行**，生产能力大，出浆浓度高，投资省，体积小，单位产量占地面积少，节约用水，易于实现人工智能，管理方便，也可多台串联使用。

工作原理：

浆料在3-8%的浓度下进入到洗浆机的两个分布盘;2个分布盘将浆料均匀的分布在转鼓上。浆料随着转鼓的转动进入转鼓与底座之间被挤压。浆料被压缩脱水到大约15%的浓度。底座和转鼓之间浆料层在相对高的浓度被洗涤。洗涤水在两个区域加入。洗涤区均匀的设计分布着洗涤水，两个转鼓之间的体积缩小，使的浆料被压榨至25-32%浓度。

刮刀将浆料从转鼓上分离下来，通过破碎螺旋输送到下个阶段。

Application：

SG935-Ⅰseries twin roll press is mainly used for stock washing and dewatering. It is suitable for the filtrating and thickening of dark pulp and bleached pulp to remove the dissolved solids, organic and inorganic in the pulp. It can ensure the uniform consistency of post-process pulp.

Design Features:

The machine is mainly composed of frame, lifting vats, press rolls, pulp discharging screw, spraying system and upper protective cover and etc. The drive form of press roll is hydraulic motor drive.

For the wood pulp, reed pulp, bamboo pulp, bagasse pulp, straw pulp with low freeness, short fiber length or the requirement of high outlet consistency, twin roll press can be used for washing and thickening at low or medium consistency.

Running with full automation, simple operation, reliable performance, big production capacity, high outlet consistency , low invest- ment, low area occupation, water saving, the twin roll press can work in series and set up in intelligent working system.

Working principle：

The stock enters the two distribution plates of the twin roll press at the consistency of 3-8%; the two distribution plates distribute the stock evenly on the drum. Stock be squeezed between the drum and the base as the drum rotates. The stock is compressed and dehydrated to the consistency about 15%. The stock layer between the base and the drum is washed at a relatively high consistency, while washing water is added in both areas. The washing area is evenly distributed with wash water, as the volume between the two drums is reduced so that the stock is squeezed to a consistency of 25-32%.

While the scraper peels the stock from the drum, the stock is conveyed to the next process by the shredding screw.

主要技术参数 / Main Technical Data

型号Model

ZSJ712

ZSJ915

ZSJ920

ZSJ928

ZSJ935

ZSJ940

ZSJ945

ZSJ1532

ZSJ1540

ZSJ1550

ZSJ1572

辊子长度

Length of Roll（mm)

1200

1500

2000

2800

3500

4000

4500

3200

4000

5000

7200

辊子直径

Dia. of Roll（mm)

Φ700

Φ900

Φ1500

辊子转速

Speed of Roll（rpm)

2~20

2~15

进浆浓度

Inlet Consistency（%）

3.5~10

出浆浓度

OutletConsistency（%）

20~35

生产能力Capacity

（T/D）

麦草浆

Straw Pulp

30~40

40~60

55~85

80~120

110~150

120~170

160~180

220~350

400~550

500~650

750~1000

竹浆

Bamboo Pulp

60~80

85~120

125~160

165~220

225~280

220~310

285~350

450~600

800~1000

1000~1300

1500~1800

木浆

Wood Pulp

80~100

130~160

175~210

250~300

310~370

350~400

400~480

700~800

1200~1500

1700~1800

2500~3000

词条
词条说明
出售上海产4400多缸叠网纸机
4200三叠网多缸造纸机生产品种：高强瓦楞纸、箱板纸、挂面白板纸定量：100-280g/㎡净纸宽：4200mm 成型宽：4500mm 设计车速：500m/min 工作车速：450m/min 排列方式：38+施胶+12+卷纸日产量：450-550t/24h 生产厂家：上海晨鸣造纸机械厂出厂日期：2004年5月一道真空压榨（双辊），上辊Φ
ZDS系列卧式水力碎浆机
ZDS系列卧式水力碎浆机/ ZDS Series Horizontal Hydrapulper 结构特点: 卧式水力碎浆机的良浆出口与沉渣排出方向互成90度，不相互干扰。叶轮及筛板特殊结构，避免了运转过程中砂、渣堵塞筛孔，可不停机连续排渣、连续操作。 Design Features: Directions of accepts outlet and rejects discharge are p
ZSJ系列双辊挤浆机
ZSJ系列双辊挤浆机/ ZSJ Series Twin-Roll Press 用途： SG935-Ⅰ型双辊挤浆机主要用于浆料的洗涤和脱水浓缩，适用于深色浆和漂白浆的过滤洗涤和浓缩，去除浆料中溶解的固形物、**物和无机物，它能**浆料给后序工艺浓度均匀。结构特点: 本机主要由机架、升降大桶、压榨辊、出料碎浆螺旋、喷淋系统及上护罩等组成。压榨辊的转动形式：采用液压马达驱动。对于游离度较低、
ZDS系列损纸碎浆机
ZDS系列损纸碎浆机/ ZDS Series Broke Pulper 用途：用于到达纸机干燥部前的湿损纸和在干燥部、施胶机、卷纸机和复卷机开机和断纸产生的干损纸和纸机生产时产生的废纸的再碎解。结构特点: 损纸碎浆机**能够接受纸机在断纸和引纸时的全部产物，还**处理成形部和干燥部的切边，因此损纸碎浆机的设计****在纸机较大能力时纸机断纸的需要。 **根据纸机的速度、宽幅、所操造纸张的