KFD2-HLC-Ex1.D.2W倍加福FI-PFH-CDR-SP

时间：2020-07-06

KFD2-HLC-Ex1.D        KFD2-HLC-Ex1.D.2W倍加福FI-PFH-CDR-SP
HART回路转换器
1通道隔离栅，24 V直流电源（电源轨），带变送器电源的HART现场设备输入，可用作信号分配器（1个输入和多个输出），3个模拟输出4 mA ... 20 mA，接收器和源模式输出，可通过键盘配置

KFD2-HLC-Ex1.D.2W
HART回路转换器
1通道隔离栅，24 V DC电源（电源轨），带变送器电源的HART现场设备输入，可用作信号分离器（1个输入和多个输出），2个继电器触点输出（转换触点），3个模拟输出4 mA ... 20 mA，灌电流和源模式输出，可通过键盘配置
FI-PFH-NS0137-R
HART终端板

K-System HART多路复用器的连接板，16通道，串联或并联接口，集成式，可切换的220电阻
HiDMux2700
HART多路复用器主机
KFD2-HLC-Ex1.D.2W倍加福FI-PFH-CDR-SP
32通道，24 V DC电源，HART现场设备输入（版本5至7），RS-485接口，高达SIL 3 acc。符合IEC 61508
FI-PFH-TR-AI-370X-GP
HART终端板
Triconex的系统板，Tricon v10 AI模块的HART终端板（ETP），用于16通道AI卡3700、3700A，3703E和3721、16通道，现场侧：螺钉端子，绿色，控制侧：ELCO插座，56 -销

FI-PFH-TR-AO-380X
HART终端板
Triconex的系统板，Tricon AO模块的HART终端板（ETP），用于8通道AO卡3805E，8通道，现场侧：螺钉端子，绿色，控制侧：ELCO插座，56针

FI-PFH-CDR-SP
HART终端板
16通道，K-System HART多路复用器的连接板，并行连接接口，通过弹簧端子连接
KFD2-HLC-Ex1.D.4S
HART回路转换器
1通道隔离栅，24 V DC电源（电源轨），带变送器电源的HART现场设备输入，可用作信号分配器（1个输入和多个输出），4个继电器触点输出（NO触点），3个模拟输出4 mA ... 20 mA，接收器和源模式输出，可通过键盘配置


KFD0-HMS-16
HART多路复用器从站

16通道，外部电源，HART现场设备输入（版本5至7），与HART Multiplexer主站KFD2-HMM-16一起使用，高SIL 3认证。符合IEC 61508

KFD2-HMM-16
HART多路复用器主机

16通道，24 V DC电源（电源轨），HART现场设备输入（版本5至7），多可连接15个KFD0-HMS-16从属单元，多SIL 3 acc。符合IEC 61508
HISHPSM/32/MM-01
HART Termination Board

32-channel, 24 V DC supply, Interface for serial or parallel wiring options, Dual RS 485 connections, Slot for HART Multiplexer

HiATB01-HART-2X16
HART Communication Board
2 x 16-channel, 24 V DC supply, Suitable for HART communication, Dual RS 485 connections, Used with HiD/HiC Termination Boards, LED indicator for supply status

HiATB01-HART-4X8
HART Communication Board
4 x 8-channel, 24 V DC supply, Suitable for HART communication, Dual RS 485 connections, Used with HiD/HiC Termination Boards, LED for supply status

HiATB01-HART-4X8-Y1
HART Communication Board
4 x 8-channel, 24 V DC supply, Suitable for HART communication, Dual RS 485 connections, Used with HiD/HiC Termination Boards, LED for supply status
HiSHPMM/64/CONA-01
HART Termination Board
64-channel, 24 V DC supply, Connection of two Multiplexers to HART enabled Honeywell TDC 3000 FTA's , Redundant power supply connections, Dual RS 485 connections, HART loop connection via four 20-pin flat ribbon connectors, Compact design

HiSHPSM/32/TB-02/HF32
HART Termination Board
32-channel, 24 V DC supply, For analog output cards, HART output filters, Interface for serial or parallel wiring options, 37-pin Sub-D connectors, Slot for HART Multiplexer

HiSHPTB/32/TR-AI-01
HART Termination Board
Triconex 3700A and 3721 replacement FTA, 2- or 3-wire or self powered transmitters, Outputs: 2 x 16 channels, 0 V ... 10 V differential, DC coupled (makes 32 channels), Short-circuit protected, Plug-n-play wiring capabilities

HiSHPTB/32/TR-AI-03
HART Termination Board
Triconex 3704E and 3720 replacement FTA, 2- or 3-wire or self powered transmitters, Outputs: 1 x 32 channels, 0 V ... 5 V differential, DC coupled, Short-circuit protected, Plug-n-play wiring capabilities

HiSHPTB/32/TR-AO-01
HART Termination Board
Triconex 3805E replacement FTA, 32 channels of I/O, Outputs: 4 x 8 channels, 4 mA ... 20 mA current loop, DC coupled, Short-circuit protected, HART analog output filters

HiS1132/CON8-H-LTX-02
HART Termination Board
APACS/QUADLOG replacement FTA, Bailey Infi 90 replacement FTA, Product connector; PCS wiring, Easy switch selectable configurations for AO and AI

HiSHPTB/32/FOX2001C-02
HART Termination Board
IA 200 replacement FTA, Designed for FBMs 201, 204, 215 and 237, 25-pin Sub-D connectors, PCS wiring, Redundant power supply connections, Easy to add line impedance

HiSHPTB/32/HONB-AI-01
HART Termination Board
TDC 3000 replacement FTA, Short-circuit protected, Process control system wirings, Redundant power supply connections, Field terminal blocks that are Honeywell FTA compatible, Honeywell "B" size footprint

HiSHPTB/32/HONB-AI-R-01
HART Termination Board
TDC 3000 replacement FTA, Short-circuit protected, Redundant PCS wirings, Redundant power supply connections, Field terminal blocks that are Honeywell FTA compatible, Honeywell "B" size footprint

HiSHPTB/32/HONB-AO-R-01
HART Termination Board
TDC 3000 replacement FTA, Short-circuit protected, HART analog output filters, Redundant PCS wirings, Redundant power supply connections, Field terminal blocks that are Honeywell FTA compatible, Honeywell "B" size footprint

HiSHPTB/32/TR-AI-02
HART Termination Board
Triconex 3701 replacement FTA, 2- or 3-wire or self powered transmitters, Outputs: 2 x 16 channels, 0 V ... 10 V differential, DC coupled (makes 32 channels), Short-circuit protected, Plug-n-play wiring capabilities

HiSHPTB/32/TR-DO-01
HART Termination Board
Triconex 3604E replacement FTA, Outputs: 2 x 16 channels, 24 V DC, opto-isolated, non commoned, Short-circuit protected, Plug-n-play wiring capabilities

HiSHPTB/32/YOK-AI-R-02
HART Termination Board
Yokogawa Centum 3000 CS AAI135 replacement FTA, 32 channels of I/O, 2- or 3-wire or self powered transmitters, Short-circuit protected, Plug-n-play wiring capabilities

HiSHPTB/32/YOK-AIO-R-02
HART Termination Board
Yokogawa Centum 3000 CS AAI835 replacement FTA, 32 channels of I/O, 16 channels AI and 16 channels AO, 2- or 3-wire or self powered transmitters or valves, Short-circuit protected, Plug-n-play wiring capabilities

HiSHPTB/32/TR-AI-01-Y1
HART Termination Board
Triconex 3700A and 3721 replacement FTA, 2- or 3-wire or self powered transmitters, Outputs: 2 x 16 channels, 0 V ... 10 V differential, DC coupled (makes 32 channels), Short-circuit protected, Plug-n-play wiring capabilities, Optimized for use in floating power configurations

词条
词条说明
S30A-7011CA S30A-4011DA
S30A-4011DA订货号:1028936产品系列:S3000 Professional产品系列:安全激光扫描仪保护区域范围:4 m 扫描角度:190° 可保存区域数量:24 S30A-4011EA 类型:S30A-4011EA订货号:1028938产品系列:S3000 Remote产品系列:安全激光扫描仪保护区域范围:4 m 扫描角度:190° 可保存区域数量:64 S30A-4011CA
KFD2-ST2-Ex1.LB倍加福KFD2-STC4-Ex1.2O
KFD0-TT-Ex1 Thermocouple Converter 1-channel isolated barrier, 24 V DC supply (loop powered), Thermocouple input, Output 4 mA ... 20 mA, Internal cold junction compensation, Sensor breakage detection,
HD2-DM-A.RO倍加福
HD2-DM-A.RO 现场总线电源集线器，带继电器输出的诊断模块用于现场总线物理层和电源的诊断，用于FieldConnex电源集线器的插件模块，即插即用-工程，用于在线监控，用于FOUNDATION Fieldbus H1和PROFIBUS PA HD2-GTR-4PA.PN PROFINET Power集线器，网关模块网关PROFINET RT到4个PROFIBUS PA网段，每个
SGM7G-44A7A2C
SGM7G SGM7G-44A7A2C 编码器类型 ** 额定输出 4.4千瓦 SGM7G SGM7G-44A7A2E 编码器类型 ** 额定输出 4.4千瓦 SGM7G SGM7G-44A7A2S 编码器类型 ** 额定输出 4.4千瓦 SGM7G SGM7G-44A7A61 编码器类型 ** 额定输出 4.4千瓦 SGM7G SGM7G-44A7A6C 编码器类型 ** 额定输出 4.4千瓦