Wireless Temperature Monitoring Application in Nan

时间：2021-02-23

朱鹍

安科瑞电气股份有限公司上海嘉定

Abstract: During the operation of the high-voltage switchgears, The contact in the cabinet and the bus connection, the dynamic and static contact circuit generates too heat, which is easy to cause power failure and fire accident. Therefore, the temperature monitoring is very important in the high-voltage switch cabinet, especially the three-phase contact temperature monitoring. The traditional wired temperature measurement method can not be used because of the exposed voltage of high voltage equipment. The wireless temperature measurement system uses radio waves, no wiring, equal potential with high-voltage equipment, and no insulation measures. Therefore, the wireless temperature measurement system can solve the temperature measurement problem of high-voltage equipment.

Keywords: high-voltage switchgears，Wireless Temperature Monitoring System

0.Project Overview

This project is the expansion project of the T1 terminal of Nanjing Lukou International Airport. It needs to be equipped with wireless temperature measurement products to realize the temperature rise monitoring of the circuit breakers in the cabinet.The working environment temperature of the sensor meets the requirement of -40℃ to +120℃. Choose ATE300 type CT inductive powered temperature sensor. And choose the ATC400 transceiver to connect to the background system.

1.Wireless Temperature Monitoring System Introduction

Wireless Temperature Monitoring System is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears. It is also suitable for 0.4kV low-voltage switchgears such as fixed switchgears and drawer switchgears.

2.Wireless Temperature Monitoring Configuration Scheme

1）Wireless temperature monitoring of contacts in high and low voltage cabinets

2）Wireless temperature monitoring with operation and display function for contacts in high-voltage cabinets (single cabinet local display)

3）Wireless temperature monitoring of contacts in high and low voltage cabinets (no local display )

4）Wireless temperature monitoring of contacts in high and low voltage cabinets（Centralized local display）

5）Local wall-mounted centralized display solution

3.Introduction of wireless temperature measuring product

①wireless temperature sensor

②wireless transceiver

③Display terminal

4.On site Photos

5 Biography

Solutions For Enterprise Micro-grid System 2020.02

作者简介：
朱鹍，女，就职于安科瑞电气股份有限公司，主要研究方向为企业能源管控

15000353138

词条
词条说明
浅谈能源管理系统在水泥行业中设计分析
朱鹍安科瑞电气股份有限公司上海嘉定 201801 摘要：水泥企业作为我国产业结构中重要的耗能产业，同时对环境的污染也比较大，因此在水泥企业中建立能源管理系统，对水泥企业的生产过程过程进行全过程的监控和管理，对于降低企业的能源消耗和提高企业的经济效益具有重要的意义。通过借助现代信息技术，对水泥生产过程中的能源消耗进行监控，加强对水泥企业的能源管理，对于降低企业的生
【节能学院】Acrel-3000电能管理系统在无锡卡特彼勒研发中心的应用
朱鹍安科瑞电气股份有限公司上海嘉定摘要：介绍无锡卡特彼勒，采用智能电力仪表、采集配电现场的各种电参量和开关信号。系统采用现场就地组网的方式，组网后通过现场总线通讯并远传至后台，通过Acrel-3000型电能管理系统实现楼层配电箱配电回路及配电房回路用电的实时监控和管理。关键词：卡特彼勒；配电箱；智能电力仪表；Acrel-3000；电能管理系统 0概述
无线测温系统在设备点检中的研究与应用
摘要：针对轧钢厂设备点检中遇到的问题进行分析，提出了使用无线测温法来解决设备点检问题的方案。通过对比有源无线温度传感器和无源无线温度传感器的技术参数及优点，在高压开关柜安装无源无线温度传感器、在行车电机上安装有源无线温度传感器，进行实时监控。无线测温系统运行近一年，有效提升了点检效率。但是，在运行中也发现了一些问题，需进一步改进、完善，实现全厂无线测温系统温度的集中监控。关键词：
苏州智能电网产业园建筑能耗监测系统的应用
摘要：随着社会生活水平的提高，经济的繁荣发展，人们对能源的需求逐渐增长，由此带来的能源危机日益严重。公共建筑如何实时的了解、分析和控制能源消耗已成为需要解决的迫在眉睫的难题。传统的能源消耗智能以月/季度/年为周期进行，然而公共建筑是每日、每时都在进行，能源消耗也是每日、每时的发生。本文介绍苏州智能电网产业园建筑能耗监测系统，系统采用现场就地组网的方式，组网后通过Acrel-5000型能耗监测系统实