环氧树脂胶带3M Super 20# 胶带

时间：2024-02-27

Flame-retardant epoxy film with thermosetting, rubber resin pressure-sensitive adhesive
3m20胶带应用丙烯酸粘合剂提供溶剂，无热固性烘烤循环的电阻；它符合刚性阻燃性组件测试程序的要求，在应用中，胶带保持良好伸长率后的电性能保持良好的机械和电气性能，建议将胶带用于包裹继电器，线圈，变压器，绕线式次级部分马力遮蔽较电机和棒绕式电机线圈。它也可以用于保持分数马力电机、绕轴线圈和电线线束。
3M? Super 10 Electrical Tape offers flexibility and conformability for easy handling and application. It meets the rigid flame-retardancy requirements of the Component Test Program of UL 510. In application, the tape maintains good electrical properties after elongation. 3M Super 10 also maintains good mechanical and electrical properties as tested for UL recognition at 155°C.

The tape is suggested for use in wrapping relays, coils, transformers, bobbin-wound subfractional horsepower shaded-pole motors and stick-wound coils. It can also be used for holding in fractional horsepower motors, arbor-wound coils and wire harnesses.

To achieve maximum solvent resistance and holding performance, thermoset the tape at0ne of the following cycles:

UL File Number E17385, Guide OANZ2. Underwriters Laboratories (UL) recognized products have been evaluated for use as components of end-product equipment that is listed or classified by UL.

To achieve Underwriters Laboratories recognition, component construction must meet UL specifications and conditions of acceptability for proper and safe use of the component or product.

1 hour@ 150°C

2 hours @ 135°C

3 hours @120°C

词条
词条说明
供固定胶带3800B
以聚合物薄膜为基材可用于临时固定的胶带。由于粘合剂不会污染被粘合体，因而这种胶带适宜于保持或固定电器用品/办公设备。用于在运输过程中临时固定家用电器部件或办公设备。产品编号 No.3800A No.3800B 厚度 [mm] 0.07 0.08 粘合剂强度 [N/25 mm] 7.80 7.50 8.00 重叠粘合剂强度 [N/25 mm] 0.10 4.32 保持力 [mm/60 min]
日本三木牛皮纸，绝缘纸变压器、电机绝缘纸
用于电机变压器等绝缘三木牛皮纸PB2 原木色。用途：电机马达，变压器，绕线管，垫片，电容器及复合材料等。备注：原木色。主要用途：扬声器绕圈，电缆，电容器，复合材料等。三木红快巴PB2 红色。用途：电机马达，变压器，绕线管，垫片，电容器及复合材料等。是一种未经层压处理及低密度的快巴绝缘纸，用于密度要求不高的场合。广发用于：变压器、电机、转动设备的线圈及线圈、干式变压器、高温工频变压器、垫片
三层绝缘线Ф0.1-1.0直径
三层绝缘线 TIW，B 级耐温130℃，绝缘强度高，耐高压、耐磨、耐回烧、直焊，可用自动绕线机进行高速绕线，减少了绕线的磨擦损坏。用三层绝缘线做成的产品，因其轻，且体积缩减，致使美观、实用、便利。常用于高频变压器、开关电源变压器、照明LED 用电源变压器、充电器、电感等等。 TC*0.10F级高温线（全称TIW-HG(F)-TC*0.10*001(F)此为环保、耐高温铜镀锡单股多层绝缘线，导体为铜
高温特氟龙镀锡线
用于变压器电感等厂家，高温铁氟龙镀锡绝缘线、多层高温铁氟龙镀锡绝缘线拍时请注明颜色，目前有库存的有蓝色、耐高温铜镀锡单股多层绝缘线，导体为铜镀锡材料，绝缘层为耐高温铁氟龙Teflon 材料，耐温F 级155℃。多层高温铁氟龙镀锡绝缘线的优势：易上锡不损害导体和绝缘层，运作快。高温特氟龙镀锡线 TIW，F 级耐温155℃，绝缘强度高，耐高压、耐磨、耐回烧、直焊，可用自动绕线机进行高速绕