供应GQ40型GQ60型直螺纹钢筋截断机

时间：2021-03-26

Reference Solar Cell and Meter


Reference Solar Cell and Meter
Reads calibrated sun irradiance and temperature
Easily integrated with I-V Test Station


The Reference Cell, which is an integral part of solar simulator calibration and solar cell I-V characterization, consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystaline silicon. The cell is also equipped with a thermocouple assembled in accordance with IEC 60904-2. The Reference Cell comes with calibration data taken by NREL, on an accompanying certificate. It reads solar simulator irradiance in "sun" units; one sun is equal to 1000 W/m2 at 25 °C and Airmass 1.5 Global Reference. This tool's primary use is the testing of photovoltaic cells under standard conditions. The Readout Meter includes two BNC connectors for analog outputs for the sun irradiance and the temperature.

Specifications

General



Dimensions: 5.9 W x 3.8 H x 7.0 D inches (151x 95x178 mm)
Weight: 4 lb. (1.8 kg)
Operating Temperature: 10 ºC - 40 ºC
Operating Humidity: 0 – 90%RH Non-Condensing

Irradiance Readout

Range: 0 – 3.500 Sun
Accuracy: ±0.1% @ 1.0000 Sun @ 23 ºC
±0.2% +2 Counts @ 0.1000 – 1.9500 Sun (Low Display Range) @ 23ºC
±0.2% +2 Counts @ 1.900 – 3.500 Sun (High Display Range)@ 23 ºC
Resolution: 0.0001 Sun @ 0 – 1.9500 Sun (Low Display Range)
0.001 Sun @ 1.900 – 3.500 Sun (High Display Range)
Temperature Coefficient: ±150 ppm / ºC Max
Settling Time: <1 sec. for <0.25% (= 6ô)
Sampling Rate: 3 Readings / second
Autoranging: Switches to higher display range above 1.950 Sun, lower range below 1.900 Sun

Analog Outputs

Sun Irradiance: 1 volts/sun
Temperature: 10 mV / 1ºC

Temperature Readout

Range: 0 – 199.9 ºC
Accuracy: ±0.5 ºC Typical, ±1.0 ºC Max @ 24 – 26 ºC
±0.7 ºC Typical, ±1.2 ºC Max @ 10 – 40 ºC
Resolution: 0.01 ºC
Temperature Coefficient: ±0.02 ºC / ºC
Settling Time: <1 sec. for <0.25% (= 6ô)
Sampling rate: 3 Readings / second

词条
词条说明
山西断水保护装置使用说明矿用断水保护器
山西断水保护装置使用说明矿用断水保护器断水保护装置，断水保护器，矿用断水保护器，矿用断水保护装置，断水保护装置批发矿用断水保护装置主要用于煤矿瓦斯抽放泵的断水保护，由矿用隔爆开关、托盘、侧导向杆、中心导向杆、外筒、放水阀、导向座、浮漂、进水阀等组成。当瓦斯抽放泵的供水正常时水箱中的浮子浮起，隔爆微动开关闭合，瓦斯抽放泵工作；当循环供水不正常时水箱中的浮子落下，隔爆微动开关打开，瓦斯抽放泵停止工
FQW系列矿用风动潜水泵都有哪些型号呢
FQW系列矿用风动潜水泵都有哪些型号呢 FQW风动潜水泵，矿用风动潜水泵，FQW30/70潜水泵，FQW35/70潜水泵，FWB35-18A潜水泵，FQWB30/70潜水泵 FQW风动潜水泵采用风动涡轮传动，压缩空气为动力。主要应用于矿山井巷、竖井井筒施工、地下室工程的排水施工。FQW风动潜水泵的型号都有哪些呢？其中有FQW30/70潜水泵，FQW35/70潜水泵，FWB35-18A潜水泵，FQW
矿用9#工字钢1.2米防倒器如何使用
矿用9#工字钢1.2米防倒器如何使用工字钢防倒器，1.2米工字钢防倒器，矿用工字钢防倒器，工字钢防倒器价格在我国煤矿的巷道支护方式中，金属型钢支架支护约占70%，其中架棚占有重要地位。工字钢防倒器属于被动的待压支护，根本无初撑力，其稳定性很差。架棚巷道掘进迎头米支架间使用有效的防倒装置，使之连锁为一个整体，倒棚和冒**事件的发生。如何使用拱形支架防倒器？炮掘工作而m支架，每帮均使用该防倒器将
钢编喷浆管长期现货供应
钢编喷浆管长期现货供应钢编喷浆管，喷浆管，喷浆管厂家，喷浆管价格喷浆机喷浆管，喷砂管长度有18米，16米等规格，内径有51型和64型喷浆管主要起到喷浆作用，分别用于干拌法和湿拌法，用在混凝土泵、混凝土喷射机上。喷浆管由高耐磨的合成橡胶与纳米材料配制而成的内胶层，钢丝增强层和耐腐蚀的外胶层组成，喷浆管材质为耐磨橡胶做成，内外两层。喷浆管有钢丝的和凡线的。主要参数规格尺寸内径(mm) 工