ACREL ASJ earth leakage relay’s Application in Philippine mine

时间：2021-10-20

朱鹍

安科瑞电气股份有限公司，上海嘉定 201801

Abstract: Ground fault protection for electrical circuits, equipment and electrical fire accidents caused by ground fault currents are increasingly becoming a daily necessity. For the main energy-consuming nodes on the user side, a residual current relay is designed and installed to monitor the residual current status of each energy-using circuit in real time. Through real-time monitoring of energy use and related power parameters, the safety, reliability and maintenance efficiency of energy use are improved, the labor cost of maintenance is reduced, and the unattended monitoring of residual current is realized. Through the real-time monitoring of energy use, data collection and alarm, the residual current in the power distribution system is monitored, and the ground fault protection of the user's electrical circuit is provided to prevent fire accidents and personal electric shock accidents caused by residual current. Here is a brief introduction to the application of our company's ASJ earth leakage relay in the Philippine mine.

1.Project Overview

The mine factory is located in the Philippines, because the current is very big, electricity supply for mine is special , customers hope that through in the power distribution ark installation of residual current relay to residual current monitoring line, and hope that can be displayed on the display panel real-time monitoring of residual current value rather than setting the ratio of residual current value, the ratio can reach 80% when the residual current relay immediately report to the police. Acrel ASJ10-LD1A with residual current transformer, successfully solve the customer's on-site residual current monitoring requirements. Due to the large current on site, we have communicated for many times on the selection of residual current transformer, and selected the most appropriate residual current transformer for the customer based on copper bar and current specifications.

2. ASJ Series Residual Current Relay

ASJ series current action relays can be combined with low-voltage power supplies or low-voltage contactor to form a combined power supply current protection, mainly used for AC 50Hz, voltage and below TT400V devices and TN system piping, in addition to ground fault protection for electrical circuits to prevent ground faults Common equipment damages and electrical failures caused by this can also prevent the danger of personal electric shock and provide direct contact protection.

The product meets the requirements of GB/T 22387-2016 "Catalyst Current Relay".

ASJ series sanitary current relays integrate line over-voltage and under-voltage protection functions and automatic additional functions for normal voltage. The product is small in size, high in precision, flexible in structure and easy to install. It is a safety protection device in the field of civil construction.

3. Model description

Technical features

Note 3：ASJ10L-LD1A rated residual action current I N is 10mA-30A continuously adjustable;

Note 4：ASJ10L-LD1A limit non-driving Time N is 0-10S continuously adjustable.

Types of Products

Note1：The function of setting for relay means that you can set the initialization and the output of the relay by yourself, which is acted by the dial switch on the panel; the specific setting guide can be found from the table 5.

Note2：OPTIONAL FUNCTION C: RTU Communication RS485, Model ASJ10L-LD1A/C

4. Model Selection of Residual Current Relay

5.Installation picture

6. Summary

ASJ series residual current relay has a very high performance-price ratio. As an advanced intelligent and digital residual current monitoring instrument, the residual current relay has been widely used in the incoming line or single-phase or three-phase of the household sub-box of civil buildings. Electric equipment in the power distribution line.

Bibliography

1.Solutions For Enterprise Micro-grid System 2021.04

作者简介：

朱鹍，女，就职于安科瑞电气股份有限公司，主要研究方向为企业能源管控

：@手机：QQ：

15000353138

词条
词条说明
浅谈限流式保护器在住宅建筑电动汽车充电桩线路中的应用
朱鹍安科瑞电气股份有限公司，上海嘉定 201801；【摘要】文章主要介绍家用电动汽车的发展情况，以及充电桩的配置需求。对目前充电桩的配置条件进行分析，以适应未来电动汽车的发展。根据电动汽车充电桩的电气设计中及地方的相关规范要求，对充电桩的设计原则、配电、照明、通信计量以及接地安全等内容进行分析、探讨。【关键词】电动汽车充电桩；配电；住宅建筑；电气防火；短路0、前言
关于用电检查对企业安全用电的重要性
朱鹍（安科瑞电气股份有限公司上海嘉定 201801）摘要：随着社会经济的发展，各行业用电量急剧增加，促进了电力市场的长足发展。作为电力企业的基础工作，用电检查是服务于用电企业的重要部分，且对企业安全用电具有重要意义。在用电检查过程中，电力企业为用电企业提供优质的用电检查服务，不仅能树立良好的形象，增强电力市场竞争力，还能为企业安全用电提供有力**。本文以用电检
Application of Intelligent Motor Protector in Yeme
朱鹍安科瑞电气股份有限公司上海嘉定1.Background In modern chemical industry, as a mechanical drag, electric motor become the foundation of all machinery. Improvement of science and technology progres
电力企业数据中心列头柜配电设计及监控产品选型
摘要：本文将从电力数据中心的末端供电可靠性出发，对几种主要的数据中心机柜供电方案进行对比研究，分析其优缺点，以及应用场景，提出为电力数据中心的关键负载提供可靠性用电**的参考方案。重点分析列头柜几种配置发展方向对其可靠性、灵活性以及经济性角度进行深入探讨，为关键电力负载提供可靠性的用电**。关键词：数据中心末端配电列头柜 1.概述：