Application of wireless temperature measurement products in a power distribution project in Malaysia

    朱鹍

    安科瑞电气股份有限公司上海嘉定

    Abstract: The power distribution system is a power network system that is composed of a variety of power distribution equipment and power distribution facilities to transform voltage and directly distribute electrical energy to end users. As a part of the power system, the power distribution system directly faces end users, and its perfection directly affects the reliability and quality of power consumption of the majority of users, so it has an important position in the power system. Therefore, in order to avoid serious accidents such as equipment aging, equipment burnout, power supply interruption, fire and explosion of equipment due to high temperature, long-term temperature monitoring of each electrical node can avoid serious failures that may cause personal injury and economic loss to users.

     

    Keywords: Wireless temperature sensor, wireless temperature monitoring system, 433Mhz wireless temperature sensor

     

    1. Project Overview

        This project is an application in a distribution room in Malaysia. It is used in a 33kV switchboard and needs to be equipped with wireless temperature measurement products to achieve safe temperature monitoring. The size of the copper bar is 10mm×130mm. Choose our ATE400 CT powered temperature sensor, and use ATC450 transceiver to connect to the display device. The RS485 communication data is transmitted to the customer platform for real-time monitoring, which can effectively prevent overheating failures, affecting the normal operation of the equipment, and avoiding potential safety hazards. For the sake of safety and economic benefits, it is recommended to conduct real-time temperature monitoring at each electrical node in the power distribution room.

    2.Introduction of Wireless Temperature Measurement Product

        Acrel on-line temperature measurement device is suitable for the temperature detection of high and low voltage switches, circuit breaker contacts, high voltage cable middle heads, low voltage and high current equipment, to prevent contact caused by oxidation, loosening and other factors during operation Excessive contact resistance and heat generation become a safety hazard, timely, continuous and accurate reflection of equipment operating status, and equipment safety.

     

    3.Features of Wireless Temperature Monitoring System

    (1) The wireless temperature measurement module is safe and reliable, and easy to install and maintain. It is suitable for temperature monitoring at the high voltage and high current contacts of the middle switch. The structure of the device under test does not need to be changed.

    (2) The entire wireless temperature measurement system can communicate wirelessly, and the ** transmission is convenient.

    (3) The wireless temperature measurement system has strong anti-interference ability, and its anti-interference ability against pulse interference, fast transient interference, electrostatic radiation, electromagnetic field radiation, etc. has reached the national four-level standard, and the operation of the equipment does not affect the opening and closing of the medium voltage switch Operation and protection device actions.

    (4) Application in industry (coal, steel, petroleum, chemical), power plants, schools, hospitals, municipal construction, transportation facilities (airports, railway stations), commercial buildings, convention and exhibition centers, photovoltaic power generation, new energy and other fields.

     

    4. Wireless Temperature Monitoring Solution

    4.1 Wireless temperature sensor

    4.1.1 Wireless temperature sensor by CT sensing  

    ATE400                                 

    ·Small size;

    ·Wireless transmit;

    ·Wireless transmission distance, 150 meters;

    ·Fase sampling frequency,15s;

    ·CT-powered, more than 5A starting current;

    ·Widely temperature measuring range, -40~125.

     

    4.1.2 Wireless temperature sensor powered by battery

    1) ATE200

    ·Wireless transmit;

    ·Wireless transmission distance, 150m;

    ·Fase sampling frequency, 25s;

    ·Battery -powered, more than 5 years;

    ·Widely temperature measuring range, -40~125.


    ATE100

    ·Wireless transmit;

    ·Wireless transmission distance, 150m;

    ·Fase sampling frequency, 25s;

    ·Battery -powered, more than 5 years;

    ·Widely temperature measuring range, -40~125

     

    ATE100M

    ·Wireless transmit;

    ·Wireless transmission distance, 150m;

    ·Fase sampling frequency, 25s;

    ·Battery -powered, more than 5 years;

    ·Widely temperature measuring range, -40~125.

     

    4.2  Receiver/Display Unit

    4.2.1 Receiver

    1)ATC600-C

    ·Wireless transceiver;

    ·Maximum measuring 240 points;

    ·1 RS485 serial communication, Modbus-RTU;

    ·2 alarm relays;

    ·Power supply adapt with AC/DC220V, AC/DC110V.

    2)ATC450-C                                                                                                                                                                          

    ·Wireless transceiver;                                    

    ·Maximum measuring 60 points;                       

    ·1 RS485 serial communication, Modbus-RTU;

    ·Power supply adapt with DC24V

     

    4.2.2 Display Unit

    1) ARTM-Pn

    ·Wireless temperature measurement, maximum measuring 60 points;

    ·U, I, P, Q, f, Ep, Eq measurement

    ·4 digital inputs;

    ·2 alarm relays;

    ·LCD display;

    ·Power supply adapt with AC220V, DC220V, DC110V, AC110V;

    ·1 RS485 serial communication, Modbus-RTU.

     

    5.Typical Connection

      

    6.Application

     

    7. Photos on Site

     

    Bibliography

    1.Solutions For Enterprise Micro-grid System 2020.02

    作者简介:

    朱鹍,女,就职于安科瑞电气股份有限公司,主要研究方向为企业能源管控

         手机:     QQ


    安科瑞电子商务(上海)有限公司专注于变电所运维云平台,安全用电管理云平台,环保用电监管云平台等, 欢迎致电 15000353138

  • 词条

    词条说明

  • 浅谈智能卡远程费控电能表的设计与应用研究分析

    摘要:分析了国内外远程费控电能表的研究现状。依据远程费控电能表的功能需求与参数要求,对远程费控电能表进行设计与研究。从功能划分角度出发,对电能表硬件电路系统作了模块化设计。对电能表的功能程序软件进行研究,实现了计量、记录、监控以及通信功能。通过主站系统下达指令可对远程费控电能表进行控制。测试结果表明,基于智能卡的远程费控电能表实现了电能数据的主动上传,有助于主站系统依靠远程费控电能表对电能数据进行

  • 浅谈综合管廊电气消防系统

    摘要:根据现有的规范及工程设计经验,阐述了综合管廊常见的火灾起因,并对综合管廊的电气防火及火灾自动报警系统进行了梳理及总结。关键词:综合管廊;电气防火;供电方式;电缆;应急照明;火灾自动报警根据目前已建成项目的经验,为尽可能减小火灾引起的危害和损失,应采取必要的工程措施减少失火诱因,控制火势的延燃;其次要设置火灾自动报警系统及相应的灭火系统,这对综合管廊的运营起着至关重要的作用。 本文探讨了综合管

  • 浅析配电室智能监控系统的设计与实践探索

    摘要:配电室智能监控系统设计,引起供电部门重视,借助科学技术,加大配电室智能监控系统设计力度,改变人工值守、单一化电力监控方式,注重完整化的配电室综合监系统创设,从而满足现代社会发展要求。

  • 新疆昌吉务中心项目能耗监测系统的研究与应用

    朱鹍安科瑞电气股份有限公司,上海 嘉定 201801; 摘要:大型公共建筑总面积不足城镇建筑总面积的4%,但总能耗却占全国城镇总耗电量的22%,大型公共建筑单位面积年耗电量达到70~300KWh,为普通居民住宅的10~20倍。公共建筑是节能大户和节能,做好公共建筑节能工作,对促进和带动全社会节能工作,实现节能减排目标,落实“转方式、调结构”重大战略具有重要意义。本文介绍新疆昌吉务中心

联系方式 联系我时,请告知来自八方资源网!

公司名: 安科瑞电子商务(上海)有限公司

联系人: 王子锋

电 话:

手 机: 15000353138

微 信: 15000353138

地 址: 上海嘉定嘉定育绿路225号

邮 编:

网 址: acrelzk001.cn.b2b168.com

八方资源网提醒您:
1、本信息由八方资源网用户发布,八方资源网不介入任何交易过程,请自行甄别其真实性及合法性;
2、跟进信息之前,请仔细核验对方资质,所有预付定金或付款至个人账户的行为,均存在诈骗风险,请提高警惕!
    联系方式

公司名: 安科瑞电子商务(上海)有限公司

联系人: 王子锋

手 机: 15000353138

电 话:

地 址: 上海嘉定嘉定育绿路225号

邮 编:

网 址: acrelzk001.cn.b2b168.com

    相关企业
    商家产品系列
  • 产品推荐
  • 资讯推荐
关于八方 | 八方币 | 招商合作 | 网站地图 | 免费注册 | 一元广告 | 友情链接 | 联系我们 | 八方业务| 汇款方式 | 商务洽谈室 | 投诉举报
粤ICP备10089450号-8 - 经营许可证编号:粤B2-20130562 软件企业认定:深R-2013-2017 软件产品登记:深DGY-2013-3594
著作权登记:2013SR134025
Copyright © 2004 - 2024 b2b168.com All Rights Reserved