朱鹍
安科瑞电气股份有限公司上海嘉定
Abstract: This paper introduces the application of Acrel DJSF1352-RN DC energy meter in the DC side of a photovoltaic system in Saudi Arabia. It is mainly used to measure the DC current in the photovoltaic system, and cooperate with current shunts to measure, communicate and control the circuit system.
1.Project Overview
The company is located in Saudi Arabia. The company is mainly engaged in installation, construction and maintenance of small photovoltaic power generation center projects in Bulgaria and surrounding countries. The customer wants to use DC meters and hall sensors or current shunts for monitoring, metering and communication of current and voltage at the DC side of photovoltaic system, and demands that the DC energy meter would be able to measure two channels of DC circuits.
2. DJSF1352-RN/D DC Energy Meters
DJSF1352-RN rail-mounted DC power meter with double DC input channels, designed for telecommunications base stations, DC charging piles, solar photovoltaic and other applications, this series of meters can measure the voltage, current, power and forward and reverse energy and so on in the DC system.The actual use of the site, you can measure the total power, but also measure the energy within a specified period of time. The test results can be used for local display, but also with industrial control equipment, computers to form a measurement and control system.The meter can have infrared communication interface and RS-485 communication interface, and supports Modbus-RTU protocol and DLT645-97 (07) protocol at the same time.The meter can have relay alarm output and digital input function;You can set the ratio, alarm, and communication through the meter panel keys according to different requirements.The meter can have event recording of switch (Modbus protocol), programming and event setting records (645 protocol), instantaneous and timing freeze function of data (645 protocol), maximum and minimum value recording function of voltage and current power.
3.Type and Function Description
Note:when dual DC input(D)function is selected,if Hall current sensor input is used in
current channel,a power supply module shall be provided to supply power to the second Hall sensor;if D function is not provided,the built-in power supply of elecctric meter can be used.
Pulse constant:
4.Requirements from Customer
4.1 The following are the customer's on-site solar panel parameters:
4.2 Two direct current metering
The customer requires a DC meter with two channels of direct current metering function, so two current shunts are needed to work with the meter.
5.Installation Picture
Bibliography
1.Solutions For Enterprise Micro-grid System 2021.04
作者简介:
朱鹍,女,就职于安科瑞电气股份有限公司,主要研究方向为企业能源管控
: 手机: QQ:
词条
词条说明
摘 要:依据广州市番禺区排水工程现状,探讨了区内远程监控系统与智慧管控系统的建设。通过设置管网监控报警模块、调度策略模块、应急预案管理模块,建成厂网河一体化的智慧管控系统,可实现番禺区内闸站、泵站、净水厂和管网运行状况的远程动态实时监控与智慧管理。经科学合理的调度分配,充分发挥现有排水设施体系作用,实现大限度地减少污水溢流量和污染物排放量,提高泵站,净水厂等设施的运行效率。关键词:智慧水务;远程监
浅析“碳达峰、碳中和背景下电力系统转型面临的挑战与对策”朱鹍安科瑞电气股份有限公司 上海嘉定1、概述 2021年是碳中和元年,为了稳步推进双碳目标,“十四五”规划进一步提出完善能源消费强度和消费总量的“双控”制度。日前,*大学电机系主任康重庆教授,从分析我国“碳达峰、碳中和”的战略意义出发,阐述了“碳视角下电力系统转型”
摘要:本文结合电网系统中封闭式 10kV 高压开关柜的工程应用需求,提出新型无源无线温度传感方法和开关柜无线测温智能监控系统的监测技术,末尾结合变电站的挂网测试算例说明监控系统的安装工艺和应用效果。该系统的应用可有效提高电网运行部门的设备巡检自动化水平,加强电网设备的安全管控,同时具有广泛的工程应用前景。关键词:无线测温;在线监测;开关柜;传感器技术一、引言如今,对变电站设备关键部位的温度监测无法
朱鹍安科瑞电气股份有限公司 上海嘉定 201801 摘要:为加强用能单位的节能管理,提高能源利用效率,控制能源消费总量,促进生态文明建设,**及各省市相关主管部门陆续发出通知,要求纳入“百千万”行动的用能单位落实节能主体责任,加强节能管理,并按照《用能单位能耗在线监测系统推广建设工作方案》(发改环资〔2017〕1711 号)等要求,建设接入端系统并按时接入省级用能单位能
公司名: 安科瑞电子商务(上海)有限公司
联系人: 王子锋
电 话:
手 机: 15000353138
微 信: 15000353138
地 址: 上海嘉定嘉定育绿路225号
邮 编:
¥770.00
¥7200.00
¥280.00
安科瑞远程预付费系统Acrel-3200 先付费后用电 远程管理
¥150000.00
¥500.00
¥32000.00