西门子G120功率模块6SL3225-0BE35-A0 PM 250 带集成式 A 类滤波器

时间：2021-12-27

西门子G120功率模块6SL3225-0BE35-A0 PM 250 带集成式 A 类滤波器

SINAMICS G120 功率模块 PM 250 带集成式 A 类滤波器能量回馈 380-480V+10/-10% 三相交流 47-63Hz 重过载功率：55kW 当 200% 3S，150% 57S， 240S；环境温度 0 至 +50°C 轻过载功率：75kW 当 150% 3S，110% 57S， 240S；环境温度 0 至 +40°C 934x 350x 316（高x宽x深）,FSF 防护等级 IP20 无控制单元和 BOP

6SL3244-0BB13-1BA1SINAMICS G120 控制单元 CU240E-2 F E-型安全集成 STO F-型 SS1，SLS，SSM,SDI RS-485-接口 6DI，3DO，2AI，2AO，蕞大 3F-DI PTC/KTY 接口 USB 和 SD/MMC 接口防护等级 IP20 环境温度 0 至 +50°C 无功率模块6SL3244-0BB12-1FA0SINAMICS G120 控制单元 CU240E-2 PN E-型配备安全集成 STO PROFINET 6DI，3DO，2AI，2AO，蕞大 1F-DI PTC/KTY 接口 USB 和 SD/MMC 接口防护等级 IP20 环境温度 0 至 +50°C 无功率模块6SL3244-0BB12-1PA1SINAMICS G120 控制单元 CU240E-2 DP E-型配备安全集成 STO PROFIBUS-DP 6DI，3DO，2AI，2AO，蕞大 1F-DI PTC/KTY 接口 USB 和 SD/MMC 接口防护等级 IP20 环境温度 0 至 +50°C 无功率模块6SL3243-0BB30-1PA3SINAMICS G120 控制单元 CU230P-2 DP 集成 PROFIBUS-DP 6 DI，3 DO，4 模拟输入，2 个模拟输出 1 个电机温度传感器输入端 2 PSU-out(10V DC，24V DC) 1 PSU-in(24V DC) USB- 和 MMC-接口防护等级 IP20
河南兆阳自动化科技有限公司销售西门子千万余产品尽新老顾客您来询价订货采购，欢迎您来兆阳公司，谢谢您的光临！
连系人：邵经理
电：191+ 39 98+ 27 30 同微号

产品
商品编号(市售编号)	6SL3225-0BE35-A0
产品说明	SINAMICS G120 功率模块 PM 250 带集成式 A 类滤波器能量回馈 380-480V+10/-10% 三相交流 47-63Hz 重过载功率：55kW 当 200% 3S，150% 57S， 240S；环境温度 0 至 +50°C 轻过载功率：75kW 当 150% 3S，110% 57S， 240S；环境温度 0 至 +40°C 934x 350x 316（高x宽x深）,FSF 防护等级 IP20 无控制单元和 BOP
产品家族	Power Modules
产品生命周期 (PLM)	PM300:有效产品
价格数据
价格组 / 总部价格组	IE / 339
列表价（不含税）	显示价格
您的单价（不含税）	显示价格
金属系数	无
交付信息
出口管制规定	AL : N / ECCN : 3A999A
工厂生产时间	20 天
净重 (Kg)	51.000 Kg
包装尺寸	400.00 x 1200.00 x 620.00
包装尺寸单位的测量	MM
数量单位	1 件
包装数量	1
其他产品信息
EAN	4019169455305
UPC	662643434712
商品代码	85044088
LKZ_FDB/ CatalogID	D11.1SD
产品组	9784
组代码	R220
原产地	德国

西门子G120功率模块6SL3225-0BE35-A0 PM 250 带集成式 A 类滤波器

概述PM240‑2 Power Modules – 0.55 kW to 250 kW (0.75 hp to 400 hp), IP20 degree of protection

PM240‑2 Power Modules, frame sizes FSA to FSG (with Control Unit and Operator Panel)

The PM240‑2 Power Modules are based on a new hardware platform. This permits an increase in power density as well as the application of innovative cooling concepts (push-through technology) with especially high requirements in terms of control cabinet cooling.

Furthermore, the PM240-2 Power Module is also suitable for use in safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).

The PM240‑2 Power Modules in frame sizes FSA to FSF are available both with and without an integrated line filter class A of compact design for 200 V, 400 V and 690 V line voltages (except PM240‑2 frame sizes FSD to FSF: 200 V). The PM240‑2 Power Modules in frame size FSG are available with an integrated line filter Category C3 of compact design for 400 V and 690 V line voltages, also with integrated line filter Category C2 for a line voltage of 400 V. In addition, a DC link reactor is integrated in the PM240‑2 Power Modules, frame sizes FSD to FSG, and therefore no line reactor is required.

The PM240-2 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded Tn/TT systems and non-grounded IT systems.

The PM240‑2 Power Module has an integrated braking chopper. In generating mode, the excess energy of the DC link can be dissipated by means of an optional braking resistor.

The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).

Push-through variant

Example: PM240‑2 Power Modules, degree of protection IP20, push-through variant, frame sizes FSD to FSF (with Control Unit and Operator Panel)

The push-through variants in the frame sizes FSA to FSF allow the cooling fins of the Power Modules to be pushed through the rear panel of the control cabinet. Push-through variants should be used in applications where the amount of power loss generated inside the control cabinet itself must be minimized.

Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more information, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.

PM250 Power Modules – 7.5 kW to 90 kW (10 hp to 125 hp), IP20 degree of protection

PM250 Power Modules, frame sizes FSC to FSF

PM250 Power Modules are suitable for a large number of applications in general mechanical engineering. Any braking energy is directly fed back into the line supply (four-quadrant applications – a braking chopper is not required).

The PM250 Power Module features an absolutely unique technology – Efficient Infeed Technology. This feature provides the ability to feed energy back into the supply system in the generator mode (electronic braking) so that the energy is not converted into heat in a braking resistor. This saves space in the control cabinet. The time-consuming process of dimensioning the braking resistor and the expense of the extra wiring are eliminated. Furthermore, heat losses in the control cabinet are reduced.

Further, the innovative circuit design reduces the line harmonics. There is no need to use an optional line reactor at the supply infeed. This saves space and costs for engineering and procurement.

Frame sizes FSD to FSF of the PM250 Power Modules are available both with as well as without integrated line filter class A.

For frame size FSC of the PM250 Power Module with an integrated line filter class A, an additional base filter of class B is available for achieving class B (see section Line-side components).

The PM250 Power Module is also designed for safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).

The PM250 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded Tn/TT systems and non-grounded IT systems.

Note:

集成

All Power Modules have the following connections and interfaces:

PM‑IF interface to connect the Power Module to the Control Unit. The Power Module also supplies power to the Control Unit using an integrated power supply

Motor connection using screw-type terminals or screw studs

2 PE/protective conductor connections

Shield connection plate

Connection example for PM240‑2 Power Modules, frame sizes FSA to FSC, with or without integrated line filter

Connection example for PM240‑2 Power Modules, frame sizes FSD to FSG, with or without integrated line filter

词条
词条说明
西门子CPU ST20 6ES7288-1ST20-0AA0
西门子CPU ST20 6ES7288-1ST20-0AA0 SIMATIC S7-200 SMART，CPU ST20，标准 CPU，DC/DC/DC，机载 I/O： 12 个 24V DC 数字输入；8 DO 24V DC；电源：DC 20.4-28.8V DC，程序存储器/数据存储器 20 KB 河南兆阳公司在经营活动中精益求精，具备如下业务优势：电：191+ 39 98+ 27
西门子G120变频器6SL3246-0BA22-1FA0带防腐蚀涂层
西门子G120变频器6SL3246-0BA22-1FA0带防腐蚀涂层SIPLUS G120 CU250S-2 PN -20...+50°C 带防腐蚀涂层基于 6SL3246-0BA22-1FA0 . 集成 PROFINET 支持矢量控制基本订位器 EPOS 通过许可扩展功能 4 个可配置 DI/DO 6 DI(3 F-DI)，5 DI 3 DO(1 F-DO) 2 个模拟输入，2
上海西门子S7 1500CPU主机6ES7515-2AM02-0AB0
上海西门子S7 1500CPU主机6ES7515-2AM02-0AB0SIMATIC S7-1500， CPU 1515-2 PN，处理器，带内存 500 KB，用于程序和 3MByte 用于数据， 1 个接口：PROFINET IRT 带双端口交换机， 2 接口：PROFINET RT， 30 ns Bit-Performance，需要 SIMATIC 存储卡 6E
西门子数字输入模块6ES7321-1BP00-0AA0单价3700
西门子数字输入模块6ES7321-1BP00-0AA0单价3700SIMATIC S7-300 数字输入 SM 321，电位隔离分成组，各 16 个， 64 DE，24V DC，3ms，P/M 读取端子块 6ES7392-1.N00-0AA0 和电缆 6ES7392-4...0-0AA0 3 件 6ES7322-1BF01-0AA0SIMATIC S7-300，数字输出