西门子S7-1500安装导轨：530mm

时间：2018-07-12

概述

Entry-level CPU in the S7-1500F Controller product range
Can be used for safety functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849
Suitable for standard and fail-safe applications with medium requirements for program scope and processing speed
Used as central controller in production lines with central and distributed I/O
Supports PROFIsafe in centralized and distributed configuration
PROFINET IO IRT interface with 2-port switch
PROFINET IO Controller for operating distributed I/O on PROFINET
PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET I/O controller
Isochronous mode

Note:
SIMATIC memory card required for operation of the CPU

应用

The CPU 1511-1 PN is the cost-effective entry-level CPU for standard and fail-safe applications with medium requirements for processing speed and speed of response in discrete production technology. With its RAM size, this CPU is also suitable for medium-sized applications. It can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities via easy-to-configure blocks as well as the ability to connect drives via standardized PLC-open blocks.

设计

The CPU 1511F-1 PN has:

a powerful processor:
The CPU achieves a command execution time as low as 60 ns per binary command.
extensive RAM:
230 KB for program, 1 MB for data
SIMATIC memory cards as load memory;
permit additional functions such as datalog and archives
Flexible expansion possibilities: single-tier configuration with max. 32 modules (CPU + 31 modules)
Display with functions for the
- Display of overview information such as station name, higher level designation, location designation, etc.
- Display of diagnostic information
- Display of module information
- Display of display settings
- Setting of IP addresses
- Setting of date and time
- Selection of the operating mode
- Resetting of the CPU to factory settings
- Disabling/enabling of the display,
- Enabling of protection levels
- display of safety mode, overall signature and date of the last download with signature change.
PROFINET IO IRT interface for connecting distributed I/O via PROFINET
Supports PROFIsafe in centralized and distributed configuration

功能

Performance
- Faster command processing, depending on the CPU type, language extensions and new data types
- Even shorter response times of the CPUs due to considerably faster backplane bus
- Powerful network connection:
  each CPU is equipped with PROFINET IO IRT (2-port switch) as standard interface.
Integrated technology
- Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
- Support of speed-controlled and positioning axes as well as external encoders
- Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
- Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
Security Integrated
- Password-based know-how protection against unauthorized reading and modification of program blocks
- Copy protection for tying individual blocks to the serial number of the SIMATIC memory card: The block can only run if the configured memory card is inserted into the CPU.
- 4-level authorization concept:
  Communication to the HMI devices can also be restricted.
- Manipulation protection:
  The controller recognizes changed or unauthorized transmissions of the engineering data.
Design and handling
- Display of the overview information:
  e.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
- Possible operations on the display:
  set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
Integrated system diagnostics
- System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
- Integrated in the firmware of the CPU, no special configuration is required
SIMATIC memory card (required for operation of the CPU)
- Used as plug-in load memory or for updating the firmware.
- Additionally for storing additional documents or csv files (for recipes and archives)
- Creation of data blocks for storage/reading of data via SFCs of the user program
Datalog (archives) and recipes
- Storage of csv files for recipes and archives on the SIMATIC memory card;
  easy access to plant-relevant operating data using Office tools or via a web server
- Easy access to configuration data of the machine by means of a web browser or SD card reader (two-way data exchange from and to the controller)
Programming of the standard program section
- Programming with STEP 7 V12 SP1
Programming of the fail-safe program section
- Programming of the safety-related program section with the option package "STEP 7 Safety Advanced". STEP 7 Safety Advanced V12 can run under SIMATIC STEP 7 Professional V12 SP1.

词条
词条说明
西门子MM440变频器6SE6440-2UC23-0CA1
(SIEMENS)上海非俗工控自动化设备有限公司（西门子分销商）联系人：瞿章明（销售工程师）联系手机：132 1743 0013 （24小时服务热线）商务QQ ：275 0130 146 微信：132 1743 0013 地址（ Add ）：上海市松江区海立华亭5幢西门子MM4
西门子6ES72211BF22OXA8
SIMOTION D 控制单元：D410?2，D4x5?2（4 个性能级别） SIMOTION D 是 SIMOTION 的结构紧凑、基于 SINAMICS S120 变频调速柜系列的版本。 SIMOTION D 控制单元有以下几种型号： SIMOTION D410-2 是带多轴选项的单轴应用的紧凑型控制单元。此控制单元有 D410-2 DP 和 D410-2 DP/PN 等型号，可卡装到块型
6ES72320HB22OXAO
中国是 ** 上的能源消费国，并且随着经济的增长，对能源的需求将持续飙升，能源系统结构也日渐复杂，给环境带来巨大压力。这就需要建设可持续的能源系统。通过为**高层建筑提供智能楼宇系统和能源管理解决方案，能够保证成千上万在这些建筑中生活，休闲，工作的人们的舒适与安全。西门子正在升级其*远程维护服务，以处理大量数据和应用程序。通过其通用远程服务平台（cRSP），西门子服务**约25万个客户设备和系
宁德西门子代理商
通过硬件中断可以监控过程信号，并且，可以触发针对信号变化的响应。数字量输入模块：根据参数设置的不同，针对每个通道组，当信号状态发生改变时，模块都可以发起硬件中断，触发沿可以选用上升沿、下降沿或者混合使用上升沿和下降沿。CPU会中断用户程序或较低**级任务的执行，并接下来执行相关的诊断中断块（OB 40）。信号模块可以缓冲一次中断/通道。模拟量输入模块：通过*上限值和下限值的参数值，可以设