SIMATIC WinCC/CalendarOption V 7.5

时间：2021-07-02

The new version SIMATIC WinCC/Calendar Scheduler V7.5 is herewith released for delivery.

The new version SIMATIC WinCC/Calendar Scheduler V7.5 is herewith released for delivery.

Please note that the SIMATIC WinCC/Calendar Scheduler V7.5 requires SIMATIC WinCC V7.5 or higher updates and service packs (see entry IDs: 109759993)

1. The Functions at a Glance

The option SIMATIC WinCC/Calendar Scheduler provides a calendar-based user interface in the style of Microsoft Office that makes scheduling easy and safe. The option consists of a Calendar Control as well as editors, with which the calendar, events and their associated actions can be configured and managed. Direct connections to WinCC tags can be set up and global scripts executed for the planned events and actions.

Calendar Scheduler Editor

In this editor the actions to be executed are created. Subsequently, events can be preconfigured.
Calendar Control

The Calendar Control is configured in the Graphics Designer and can be made dynamic in WinCC using all WinCC standard mechanisms such as tag connections, VBS, C, direct connections or dynamic dialogs.
Supported functions

- Access protection via the WinCC User Administrator
- Dragging & dropping of events
- Different calendars
- User-defined calendar views
- Traceability through event messages in the WinCC alarm system
- Server client, redundancy and Web Navigator

2. System requirements

The software and hardware requirements for WinCC/Calendar Scheduler V7.5 are the same as for WinCC V7.5. The same operating systems as for WinCC V7.5 are supported (see entry ID: 109759993 )

3. Licensing

The license is valid for each single-user or server. No license is required on the WinCC Clients.

The following license is available:

SIMATIC WinCC/Calendar Scheduler V7.5

4. Quantity structure

There are no quantity limitations with regard to

the number of events the number of actions the number of controls

5. Delivery Scope and Ordering Data

The delivery of the WinCC/Calendar Scheduler is comprised of the WinCC/Calendar Options V7.5 CD, a USB stick and a Certificate of License. The documentation in five languages is contained on the CD.

Product Name	Order Number
WINCC/CALENDAR SCHEDULER V7.5	6AV6372-1DC07-5AX0
WINCC/CALENDAR OPT UPGR V7.2/7.3 -> V7.5	6AV6372-1DC07-5AX3
WINCC/CALENDAR OPT UPGR V7.4 -> V7.5	6AV6372-1DC07-5AX4
WINCC/CALENDAR SCHEDULER V7.5 DL	6AV6372-1HC07-5AX0
WINCC/CALENDAR O. UPGR V7.2/7.3->V7.5 DL	6AV6372-1KC07-5AX3
WINCC/CALENDAR OPT UPGR V7.4 -> V7.5 DL	6AV6372-1KC07-5AX4

13681875601

词条
词条说明
PLS指令移植
PLS指令移植S7-200 与 S7-200 SMART 使用PLS指令控制脉冲串输出（PTO）的SM 定义不同，不能将 S7-200 CPU 编写的 PLS指令程序直接用于S7-200 SMART。PLS指令的单段管道化如表1所示，使用 STEP 7-Micro/Win SMART 打开S7-200 CPU 的 PLS 指令程序需修改控制字节（SM67.6）和更改周期为频率（SMW68）。表1.
如何通过 C 或 VB 脚本在 WinCC Runtime Professional 中改变一个 f(t) 趋势的趋势变量？
趋势显示动态化描述在此使用的脚本可以在运行期间改变较初组态的趋势所关联的变量。实例过程画面"Trends" 中趋势标题为"Control_1"。已经定义了“ Trend1 ”趋势的数据源为过程值归档“ TestArchive ”中的变量“ TagA ”。现在使用脚本在运行系统中将变量“ TagB ”定义为“ Trend1 ”趋势的数据源。说明以下是使用 C 脚本来分配不同的过程值归档变量到趋势。&
头文件的移植 (WinCC V7)
头文件的移植 (WinCC V7)简介由于系统侧发生变化，移植头文件时需要考虑一些事项。下面介绍了由于移植而发生的变化。头文件的移植在 WinCC V7 中，用于头文件的标准存储过程包含在项目中。存储在项目中的头文件将被移植，并存储在 WinCC 项目树中的相应设备的“函数 > C 头函数”(Functions > C-Header) 下。如果已在其它位置保存头文件且将其与 WinCC
调整项目 (WinCC V7)
调整项目 (WinCC V7)原因：移植项目时必须调整项目。导致需要进行后组态的原因包括：移植期间发出并输入到移植日志中的消息。在要移植的项目中不一致或无效的数据。TIA Portal 中的 WinCC 对变量地址有效性或对象名称长度等检查有严格的标准。移植不能更正无效信息。移植期间，在 WinCC V7 项目目录中创建的文件夹和文件不会复制到新的项目目录。必须在移植后修改访问这些目录和文件的所有