Functionality of the SIMATIC Drive Controller

时间：2021-07-28作者：上海腾希电气技术有限公司浏览：83

Functionality of the SIMATIC Drive Controller



SIMATIC Drive Controller

The SIMATIC Drive Controller is a drive-based controller in the SIMATIC S7-1500 range.

A SIMATIC Drive Controller combines the following functionalities in a SINAMICS S120 Booksize Compact housing:

Fail-safe SIMATIC S7-1500 technology CPU with integrated technology I/Os

SINAMICS S120 drive control

The two components are referred to as "CPU" and "SINAMICS Integrated" in this documentation.

The integrated SINAMICS S120 drive control is based on a CU320-2 Control Unit. It can control

a maximum of 6 servo drives,

a maximum of 6 drives with vector control, or

a maximum of 12 drives with U/f control

Fail-safe technology CPUs are available in two performance classes. Safety Integrated on the CPU side and drive side allows use in fail-safe applications.

The SIMATIC Drive Controller supports PROFINET and PROFIBUS DP communication.

Drive Controller-specific hardware properties

As a component of the SINAMICS S120 drive system, the configuration conditions and rules of SINAMICS S120 apply to the SIMATIC Drive Controller.

Drive Controller-specific properties of the CPU

The SIMATIC Drive Controller is optimized for automation solutions with motion control in which SINAMICS S120 high-performance converters are used.

With its extensive field bus interfaces, the SIMATIC Drive Controller is ideal for modular machine concepts.

Service functions

The SIMATIC Drive Controller does not have an integrated display. You can alternatively run service functions over the integrated Web server, for example. You can save the service data to the SIMATIC memory card using the FUNCT button.

S7-1500 I/O

The SIMATIC Drive Controller has no S7-1500 backplane bus. You can connect S7-1500 I/O modules using the ET 200MP distributed I/O system. Note that CM/CP communication modules for PROFINET/PROFIBUS in particular cannot be used in the ET 200MP distributed I/O system. Only communication modules for point-to-point connection (CM PtP) can be used. Alternatively, other I/O systems are available for installation in the control cabinet (e.g. ET 200SP) or for cabinet-free installation (e.g. ET 200pro, ET 200AL and ET 200eco PN).

Time-based IO

The function blocks for the use of time-based IO (TIO instructions) are not supported by the digital inputs/outputs of the X142 interface. Recommendation: Use the measuring input, output cam or cam track technology objects for the timer DI/DQ.

Device replacement

The SIMATIC Drive Controller supports replacement of the SIMATIC Drive Controller CPU with the modular SIMATIC S7-1500 CPUs. Replacement with controllers of other designs (e.g. ET 200SP, ET 200pro) is not possible.

Drive Controller-specific properties of SINAMICS Integrated

The drive control integrated in the SIMATIC Drive Controller supports only functions that are relevant in the control context (i.e. functional subset of SINAMICS S120 CU320-2 functions). For example, the Drive Control Chart (DCC) and basic positioner (EPOS) functions are not supported by SINAMICS Integrated.

A complete overview of the functional subset compared with the S7-1500 automation system can be found in the S7-1500 Drive Controller system manual.

Device replacement

An exchange of devices between SINAMICS Integrated and SINAMICS S120 CU320-2 is not possible.

Copying and pasting of individual drive objects from SINAMICS Integrated to SINAMICS S120 CU320-2 (and vice versa) is not possible with V16.




上海腾希电气技术有限公司专注于西门子PLC,V90伺服,V20变频器等, 欢迎致电 13681875601

• 词条

  词条说明

• CPU SR30

  技术数据SIMATIC S7-200 SMART，CPU SR30， 标准 CPU，AC/DC/继电器， 机载 I/O： 18 个 24V DC 数字输入；12 DO 继电器 2A； 电源：AC 47-63Hz 时，85 - 264V AC 程序存储器/数据存储器 30 KB一般信息产品类型标志CPU SR30 AC/DC/继电器附带程序包的● 工程系统STEP 7 Micro/WIN SMART

• 在项目运行时报警记录还在工作，但报警视图中没有显示报警信息该怎样处理？

  如果报警信息不在报警视图中显示，但报警记录还在运行工作。补救措施请参考此 FAQ 。原因一种可能的原因是 IM 文件不一致。解决方法删除 TIA Protal 项目中的 IM 文件。

• ISO 传输 - 特殊连接属性

  ISO 传输 - 特殊连接属性相关性可以在“属性 > 常规 > 特殊连接属性”(Properties > General > Special connection properties) 参数组中，*本地连接端点的其它属性。建立主动连接此选项用于*是否通过该设备建立连接。 如果*了伙伴的地址，则该选项是默认选项。开： 已建立主动连接。关： 已由伙伴建立连接。在创建连接

• PC CP 和应用程序

  适用于 VMware vSphere Hypervisor ESXi 的 PC CP以下为已发布的可配合 STEP 7 Professional V14 的 VMware vSphere Hypervisor ESXi 使用的通信处理器：CP 5711VMware E1000 网络适配器以下为尚未发布的可配合 VMware vSphere Hypervisor ESXi 使用的