澳大利亚更新纽扣电池认证要求

时间：2021-07-27

澳大利亚强制性安全和信息标准草案规定了包含纽扣和币形电池以及纽扣和币形电池本身的消费品的要求。

包含纽扣电池和币形电池的消费品安全标准规定了使用/包含纽扣/币形电池的消费品的要求，其设计应避免儿童接触纽扣/币形电池，包括电池应牢固，在正常和可预见的使用和滥用条件下不会释放电池。

纽扣电池和币形电池的安全标准规定了纽扣电池和币形电池的儿童防护包装要求。

含有纽扣电池和币形电池的消费品信息标准规定了未包装产品的包装、说明和零售点的警告和信息要求。

纽扣电池和币形电池的信息标准规定了纽扣电池和币形电池包装上的警告和信息要求以及某些币形电池的标记要求。

The draft Australian mandatory safety and information standards specify requirements for consumer goods containing button and coin cell batteries and button and coin cell batteries themselves.

The safety standard for consumer goods containing button and coin cell batteries specifies requirements for consumer goods that use/contain button/coin cell batteries to be designed to eliminate child accessibility to the button/coin cell batteries, including that the batteries shall be secure and not release the batteries during normal and foreseeable use and abuse conditions.

The safety standard for button and coin cell batteries specifies requirements for child-resistant packaging of button and coin cell batteries.

The information standard for consumers goods containing button and coin cell batteries specifies requirements for warnings and information on packaging, instructions and at the retail point of sale for unpackaged products.

The information standard for button and coin cell batteries specifies requirements for warnings and information on the packaging of button and coin cell batteries and for markings on certain coin cell batteries.

Relevant documents:

The draft Australian mandatory safety standard for consumer goods containing button and coin cell batteries permits suppliers to comply with one of the following industry standards (or sets of industry standards) deemed to have acceptable button/coin cell battery security and compliance testing requirements.

IEC 62368-1: 2018 Audio/video, information and communication technology equipment – Part 1: Safety requirements

AS/NZS 62368.1:2018 Audio/video, information and communication technology equipment – Part 1: Safety requirements

AS/NZS 60065:2018 Audio, video and similar electronic apparatus-Safety requirements

IEC 62115:2017 Electric toys – Safety – clause 13.4.1, 13.4.2, 13.4.6 and ISO 8124-1:2018 Safety of toys – Part 1: Safety aspects related to mechanical and physical properties

AS/NZS 62115:2018 Electric toys – Safety – clause 13.4.1, 13.4.2, 13.4.6 and AS/NZS 8124.1:2019 Safety of toys – Part 1: Safety aspects related to mechanical and physical properties

AS/NZS 60598.1:2017 Luminaries Part 1: General requirements and tests

UL 4200A UL Standard for Safety for Products Incorporating Button or Coin Cell Batteries of Lithium Technologies

The draft Australian mandatory safety standard for button and coin cell batteries permits suppliers to comply with one of the following industry standards to demonstrate that the child-resistant packaging requirements have been met.

IEC 60086-4:2019 Primary Batteries Part 4: Safety of lithium batteries

AS 5808-2009 Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

EN 862:2016 Packaging - Child resistant packing - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

ISO 28862:2018 Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products

AS 1928-2007 Child-resistant packaging - Requirements and testing procedures for reclosable packages

ISO 8317-2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages

USA: 16 CFR §1700 Poison Prevention Packaging Standard

The mandatory safety standard for button and coin cell batteries applies child-resistant packaging requirements that deviate from IEC 60086-4 by requiring child-resistant packaging to:

button and coin cell batteries of lithium chemistry of all sizes

button batteries of a chemistry other than lithium with a diameter of 16mm or above.

The mandatory information standard for consumer goods containing button and coin cell batteries applies warning requirements that deviate from certain industry standards that specify button/coin cell battery related warning requirements by requiring that the front panel of the packaging of the consumer goods be marked with an internationally recognised safety alert symbol.

Proposed date of adoption: The mandatory safety and information standards are subject to Australian Government consideration and approval.

Proposed date of entry into force: The proposed requirements will be mandatory 18 months after the mandatory safety and information standards commence.

词条
词条说明
EMC简介
电子、电器产品的电磁兼容性(EMC)是一项非常重要的质量指标，它不仅关系到产品本身的工作可靠性和使用安全性，而且还可能影响到其他设备和系统的正常工作，关系到EMC认证磁环境的保护问题！欧共体**规定，从1996年1月1起，所有电气电子产品通过EMC认证，加贴CE标志后才能在欧共体市场上销售。此举在世界上引起广泛影响，各国**纷纷采取措施，对电气电子产品的RMC性能实行强制性管理。国际上比较有影响的
邓白氏编码是什么-邓白氏编码申请流程和费用详解
邓氏编码是邓白氏拥有的一个*一**的9位数字**编码系统，它可以帮助您*获得邓白氏*创的，丰富而且高质量的信息产品和服务。邓氏编码已经成为电子商务中一个国际认可的、常用的公司识别符号。在**较有影响力的标准定制机构中，50多家**、行业及贸易机构，及美国联邦**承认、推荐或是要求使用该编码系统。邓氏编码是成功建立企业族系树的关键。由于同一企业在各地的实体都有自己的邓氏编码，一个庞大
E-Mark认证
E-Mark 也就是欧洲共同市场，对汽机车及其安全零配件产品，噪音及废气等，均需依照欧盟法令【 EEC Directives 】与欧洲经济**法规【 ECE Regulation 】的规定，通过产品符合认证要求，即授予合格证书，以确保行车的安全及环境保护之要求。E-Mark 依认证国别不同，所授予之编号也不同，例如像卢森堡提出申请，其 E-Mark 标志为E13/e13。认证所需资料A01新客户
电源适配器CE认证的测试要求和费用介绍
电源适配器是移动设备中经常使用的配件之一，如笔记本、手机，这些产品都会使用到电源适配器。电源适配器适用范围很广，不仅在移动设备端，在其它领域也会应用到。电源适配器出口欧盟国家都需要CE认证。